Parts Counting; Determination Of The Reference Weight By Weighing - KERN CPB 3K0.1 Operating Manual

Add more components into the weighing
container (adding).
NOTE:
The balance is able to only store one taring value at a time.
When the balance is unloaded the saved taring value is displayed with negative
sign. Remove all items from the weighing plate in order to delete the stored tare
value and subsequently press the TARE key.
The taring process can be repeated any number of times. The limit is reached
when the whole weighing range is exhausted.

9 Parts counting

With parts counting you can either count parts into a container or remove parts from
a container. To count a greater number of parts the average weight per part has to
be determined with a small quantity (reference quantity). The larger the reference
quantity, the higher the counting exactness. High reference must be selected for
small parts or parts with considerably different sizes.

9.1 Determination of the reference weight by weighing

Operation
Set your balance at zero
Tare the weighing container:
CPB-BA-defsi-0712
Now read off the weight of the added
item to be weighed on the display.
NET
Display
NET
NET
Weight
1.40
a
Weight
z0
a
Weight
z0
a
57