Numeric Entering Of The Reference Weight; Automatic Reference Optimization - KERN CPB 3K0.1 Operating Manual

9.2 Numeric entering of the reference weight

If you know the reference weight/piece you can enter this via number keys.
Determine reference weight:
Enter reference weight via number keys
Piece weight
Confirm within 5 sec:
5.00
PRESET
Count the items:
Now you can place the parts to be counted onto the weighing plate. All quantity
parameters of your goods to be weighed are displayed:
Reference weight: Quantity placed on balance:
Weight placed on balance:
Piece weight Pcs
Weight
z 0 5
5.00
10
PRESET
NET
a

9.3 Automatic reference optimization

If the weight on the pan or the given quantity is too small when determining the
[ ] [ ]
reference, a triangle will be superimposed on or in the reference
weight display.
To optimise the calculated reference weight automatically, further pieces must be
added, and their quantity/weight must be less than the given reference. An acoustic
signal will sound as the reference optimisation is carried out. With each reference
optimisation, the reference weight is re-calculated. The reference will be more
accurate because the additional pieces increase the basis for the calculation.
As soon as the number of added parts exceeds the stored reference quantity,
automatic reference optimisation is deactivated.
CPB-BA-defsi-0712 59