Weighing; Switch On/Off And Set Zero; Simple Weighing - KERN CPB 3K0.1 Operating Manual

8 Weighing

8.1 Switch on/off and set zero

Operation
1. Switch on balance
Press ON/OFF switch and hold briefly (at
the bottom right side of the balance)
The balance will carry out a self-test
2. Zeroing

8.2 Simple weighing

Operation
Place goods onto weighing plate
If the goods are heavier than the
weighing range, the display will show
"QL" (=Overload), and a whistle is
sounded.
CPB-BA-defsi-0712
Display
As soon as the weight display shows "0"
in all the three display windows your
balance is ready to weigh.
NET
NET
The zero display and the arrow above
the „→0←" symbol are displayed.
Display
Read weighing result
NET
If weighing values are stable the arrow
will be displayed above the
Weight
z0
a
Weight
z0
a
Weight
z 0 5
a
- symbol.
55