When Moving The Unit - Roland CJ-540 User Manual

4-8 When Moving the Unit

Before attempting to move the machine, clean the heads. Four optionally available cleaning cartridges are required to clean all
the heads. Each cleaning cartridge can be used to perform cleaning three times.
Do not tilt the machine at a large angle. Ink or discharged fluid remaining in the machine may leak or spill, causing breakdown
or malfunction.
If there is media loaded, hold down the [SETUP]
1
key for 1 second or longer to cancel setup, then
remove the media (see "2-3 Loading Media --
Removing the Media").
Press the [MENU] key and [
2
the following screen appear on the display.
Press the [
3
appear on the display.
4 Use the [
press the [ENTER] key.
When the display shown in the figure appears,
5
discard the discharged ink in the drain bottle.
Be sure to discard the discharged ink. Attempting
to clean the heads while discharged ink remains may
cause discharged ink to overflow from the bottle.
For more information about how to dispose of dis-
charged ink, see "4-5 Disposing of Discharged Ink."
6 Mount the drain bottle and press the [ENTER]
key to display the screen shown in the figure.
Chapter 4 - Maintenance
86
] key to make
] key to make the following screen
] key to select [HEAD WASH], then
INK CONTROL
EMPTY MODE
INK CONTROL
HEAD WASH
EMPTY
DRAIN BOTTLE
REMOVE CARTRIDGE
MENU
INK CONTROL