Specifications; Main Unit Specification - Roland CJ-540 User Manual

7-1 Specifications

Main unit Specification

Printing / Cutting method
Printing / Cutting width
Acceptable media widths
Conditions for usable media
Ink cartridges
Printing resolution (Printing dot resolution)
Distance accuracy (When printing)
Acceptable tool
Cutting Speed
Blade force
Blade offset compensation
Software resolution (When cutting)
Distance accuracy (When cutting)
Repetition accuracy (When cutting)
Repetition between printing and cutting
Alignment accuracy for printing and cutting
when reloading media
Printing heads cleaning
Interface
Power-saving function
Power consumption
Acoustic noise level
Dimensions
Packed dimensions
Weight
Chapter 7 - Appendix
114
-Cuttable media thickness: 0.08 to 0.22 mm (0.00315 to 0.00866 in.) (depending on media composition)
-Maximum cuttable media thickness including base paper (backing paper): 0.4 mm (0.0157 in.)
-Maximum printable media thickness including base paper (backing paper): 1.0 mm (0.039 in.)
-Maximum diameter for roll media: 180 mm (7-1/16 in.)
-Core inner diameter for roll media: 50.8 mm (2 in.) or 76.2 mm (3 in.)
-Maximum weight for roll media: 20 kg (44.1 lb.)
Pigmented ink
Capacity
Color The six colors black, cyan, magenta, yellow, light cyan, and light magenta or
Dye-based ink
Capacity
Color
Error of less than ±0.3% of distance traveled, or 0.3 mm, whichever is greater (at Roland PET-
Error of less than ±0.4% of distance traveled, or 0.3 mm, whichever is greater
(when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made):
Error of less than ±0.2% of distance traveled, or 0.1 mm, whichever is greater
For media with a width exceeding 610 mm (24 in.): Length 4,000 mm (157-7/16 in.)
For media with a width of 610 mm (24 in.) or less : Length 8,000 mm (315-15/16 in.)
(excluding possible shift caused by expansion/contraction of the media and/or by reloading the
Error of less than ±0.3% of distance traveled, or 2 mm, whichever is greater
[Guaranteed area of alignment for printing and cutting when reloading the media] (*2)
Bidirectional parallel interface (compliant with IEEE 1284: Nibble mode, ECP mode (non
Printing mode
Standby mode
Printing mode
Standby mode
Main unit 2699 mm [W] x 742 mm [D] x 519 mm [H] (106-5/16 in. [W] x 29-1/4 in. [D] x 20-7/16 in. [H])
With stand 2699 mm [W] x 742 mm [D] x 1300 mm [H] (106-5/16 in. [W] x 29-1/4 in. [D] x 51-3/16 in. [H])
2835 mm [W] x 850 mm [D] x 965 mm [H] (111-5/8 in. [W] x 33-1/2 in. [D] x 38 in. [H])
Main unit
With stand
CJ-540
Piezo ink-jet method / media-moving method
185 to 1346 mm (7-5/16 to 53 in.)
210 to 1371 mm (8-5/16 to 54 in.)
Exclusive pigmented ink cartridge
220 cc ±5 cc
the six colors black, cyan, magenta, yellow, orange, and green
Exclusive dye-ink cartridge
220 cc ±5 cc
The six colors black, cyan, magenta, yellow, light cyan, and light magenta
Max. 1440 dpi
film, print travel: 1 m (39-3/8 in.))
Cutter (blade and blade holder) : Special blade for CAMM-1 series
10 to 600 mm/s (10 to 300 mm/s in the media-feed direction)
30 to 300 gf
0.000 to 1.500 mm (0 to 0.0591 in.)
0.025 mm/step (0.00984 in./step)
When distance correction has been performed
0.1 mm or less (excluding stretching/contraction of the media)
[Range for assured repetition accuracy] (*1)
± 0.5 mm (± 0.0197 in.) max. at 25°C (77°F)
media, and provided that media length is under 3000 mm (118-1/16 in.)
Automatic cleaning and manual cleaning
compression) ) and Ethernet 10Base-T or 100Base-TX
Auto-sleep
Maximum: 2.0A/100V to 240V ±10% 50/60 Hz
Maximum: 0.6A/100V to 240V ±10% 50/60 Hz
65dB (A) or less
40dB (A) or less
136 kg (299.8 lb.)
152 kg (335 lb.)
(According to ISO7779)