1-3 Assembling and Installing
Step 2: Install the Included Items
Attach the arms onto the back of the machine at the locations shown in the figure.
1
Left-hand side of
the back of the unit
Pass the stoppers onto both ends of the shaft.
2
When passing the shaft through the stopper, be sure to loosen the screws on the stopper first.
Tighten loosely with the screws.
Attach the two shafts and engage the brake. Install the shafts so that the one with the stopper is in front
3
of the back of the machine.
Rear
Shafts
Chapter 1 - Getting Started
20
Bolts
(Large)
Arm(Right)
Stopper
Stopper
Brake
Right-hand side of
the back of the unit
Bolts
(Large)
Arm(Left)
Shaft
Make sure the shaft brake is engaged. Using
the machine with the brake disengaged may
result in unstable media feed, leading to poor
image quality.