Transfer Assembly - Mitsubishi Lancer Evolution-IV Workshop Manual

22A-10

TRANSFER ASSEMBLY

REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
D
Transmission Oil Draining and Supplying
(Refer to P.22A-3.)
D
Transfer Oil Draining and Supplying
(Refer to P.22A-3.)
Gear oil:
MITSUBISHI genuine
Super" hypoid gear oil (GL-5)
Removal steps
D Drive shaft (Refer to P.22A-9.)
D Output shaft (Refer to P.22A-9.)
1. Front propeller shaft
(Refer to GROUP 25)
AA"
2. Transfer assembly
Oil seal lip
MANUAL TRANSMISSION –
"Dia-Queen
REMOVAL SERVICE POINT
MB991193
AA" TRANSFER ASSEMBLY REMOVAL
Caution
(1) Use care not to damage the lip of the oil seal in the
(2) Use the special tool to cover the opening in the transfer
Transfer Assembly
D
Front Exhaust Pipe Removal and Installation
(Refer to GROUP 15.)
transfer case.
case to prevent oil from flowing out or foreign materi-
als from entering the case.
69 {7.0}
2
1
Unit: Nm {kgf@m}