Mitsubishi Lancer Evolution-IV Workshop Manual page 234

REAR AXLE
Grommet
25 ± 5 mm
15 mm
Suction hose and
return hose
Hook
Rear floor side member
– Hydraulic Unit <Vehicles with AYC>
INSTALLATION SERVICE POINTS
"AA GROMMET INSTALLATION
On the vehicle mounted with a sun roof, mount the drain
pipe to the grommet as illustrated.
Drain pipe
"BA SUCTION HOSE / RETURN HOSE INSTALLATION
Fit the suction hose and return hose to the nipple of hydraulic
unit as illustrated.
Nipple
"CA HYDRAULIC UNIT AND BRACKET ASSEMBLY
Hook the hydraulic unit bracket hook to the rear floor side
member and install the hydraulic unit and bracket assembly
mounting bolt.
INSTALLATION
27-51