37A-2
STEERING –
SERVICE SPECIFICATIONS
Items
Steering angle
Steering gear
SPECIAL TOOLS
Tool
Service Specifications / Special Tools / On-vehicle Service
EVOLUTION-IV
EVOLUTION-V
Pinion total turning torque
Nm {kgf@cm}
Nm {kgf cm}
Number
Name
MB991197
Installer bar
MB991199
Oil seal installer
MB991214
Oil seal protector
ON-VEHICLE SERVICE
1. STEERING ANGLE CHECK
Locate front wheels on turning radius gauge and measure
steering angle.
Standard value:
When the angle is not within the standard value, the toe
is probably incorrect. Adjust toe (Refer to GROUP 33A –
On-vehicle Service) and recheck steering angle.
2. OIL PUMP BELT TENSION CHECK AND
Refer to GROUP 11 – Engine Adjustments.
Inner wheel
Outer wheel
Inner wheel
Outer wheel
Total turning torque
Torque fluctuations
Use
Pressfitting of gear housing oil seal
Installation of rack assembly
Inner wheel
33_30' ± 2_ <EVOLUTION-IV>
33_10' ± 2_ <EVOLUTION-V>
Outer wheel
28_20' <EVOLUTION-IV>
28_10' <EVOLUTION-V>
ADJUSTMENT
Standard value
33_30' ± 2_
28_20'
33_10' ± 2_
28_10'
0.9 – 1.7 {9 – 17}
0.4 {4} or less