Table of Contents
Advertisement
Retrieve size of user flash storage
EIA-232 Syntax:
Purpose:
Remarks:
Retrieve printer usage statistics
EIA-232 Syntax:
where:
Purpose:
Remarks:
Use this procedure to retrieve printer usage statistics from the printer:
1. Reset the printer. (This is an optional step. It ensures that the most recent
2. Perform the Retrieve Printer Usage Statistics command.
3. Multiply the returned value by the factor given in Table 24 to get the actual
162
SureMark Printers User's Guide
ESC 4 x '08 FF FF FF' or X'1B;34;08;FF;FF;FF'
Retrieve the size of the user flash storage in the printer.
The size of the user flash storage will be returned in 8 bytes after the
printer status bytes. The data will be in the form of ASCII decimal data.
X'1B 51 xx'
xx
The hex value of the requested statistic. See Table 24.
To send printer usage statistics from the printer to the host.
v The usage statistics are sent over the serial line in status bytes 9 and 10.
See Table 24 for the values of parameter xx.
counts will be retrieved.)
EIA-232 Syntax:
X'10 05 40'
printer statistic.
Table 24. Retrievable usage data
Hex Value
Usage Data Being Tracked
6D
Runtime monitoring for image brightness; Runtime
monitoring for image contrast (see Note 3)
6E
Runtime monitoring for image focus (see Note 3)
70
Manufacture Week Code: ww,yy where 2405 would be the
24th week of 2005
80
FRU Card/Invalid usage numbers (set to X'0164' at the
factory, not set for FRU logic cards)
81
Number of paper cuts
82
Low byte of the number of characters printed on the CR
(thermal) station (see Note 1 and 2)
83
High byte of the number of characters printed on the CR
(thermal) station (see Note 1 and 2)
84
Number of steps performed by the CR paper feed motor
(200 steps per inch of paper)
85
Number of times the customer receipt cover was opened
(see Note 2)
Updated April 2, 2009
Factor
N/A
N/A
N/A
N/A
32
None
None
50 000
None
Advertisement
Table of Contents
