Table of Contents
Advertisement
Document insert forms (Models TI1, TI2, TI3, TI4, TI8, TI9, TG3, TG4,
TG8, and TG9 only)
The printers will accommodate single and multipart forms.
Single and multipart form specifications
Notes:
1. Test all forms in the printer to ensure acceptable performance prior to buying a
2. Forms less than 0.15 mm (0.006 in.) thick with the grain of the paper
Specifications for documents that can be flipped
Multipart forms and short-grain single-part forms are not supported.
82
SureMark Printers User's Guide
Important
Printer reliability and performance are directly related to the quality of the
supplies used by the customer. The published parameters for printer
performance are established using supplies that meet the specifications listed
above.
Thermal paper with post-processing, such as (but not limited to) watermarks,
coupons, or advertisements printed on the front or back of the paper, is not
covered by IBM specifications. Some inks and printing processes will work
acceptably, while others will not. Printer problems that are caused by supplies
that do not meet IBM specifications may result in a billable service call,
regardless of the existence of a service contract.
Specification
Minimum width:
Maximum thickness of multipart forms:
Maximum thickness of front sheet, multipart
forms:
Minimum thickness of single-part form:
Maximum thickness of single-part form:
Weight range for single-part forms:
For best reliability, paper grain should be in the direction that the paper is fed into the
printer.
significant quantity. There should be no binding holes or other holes within 10
mm (0.4 in.) from the right edge of the form.
perpendicular to the feed direction (short-grain paper) should not be used for
landscape printing.
Specification
Minimum form length:
Maximum form length:
Maximum form width:
Paper weight:
Value
50 mm (2 in.)
0.47 mm (0.0185 in.)
0.08 mm (0.003 in.)
0.10 mm (0.004 in.)
0.2 mm (0.008 in.)
68–90 g/m
Value
80 mm (3.14 in.)
223 mm (8.78 in.)
102 mm (4 in.)
2
75–95 g/m
Updated April 2, 2009
2
(18–24 #)
Advertisement
Table of Contents
