Set Code Page; Set Intercharacter Spacing; Set Or Cancel Rotated Characters - IBM SUREMARK TF6 User Manual

Updated April 2, 2009

Set code page

EIA-232 Syntax:
where:
Default:
Remarks:

Set intercharacter spacing

EIA-232 Syntax:
where:
Default:
Maximum:
Remarks:

Set or cancel rotated characters

EIA-232 Syntax:
where:
Default:
Remarks:
ESC t n or X'1B;74;n'
n=00 Code Page 437 - United States
n=01 Code Page 858 - Multilingual
n=02 Code Page 863 - Canadian-French
n=03 Code Page 860 - Portugal
n=04 Code Page 865 - Norway
n=05 Printer's Generic Code Page
n = 01
Changing code pages is valid for resident character sets only. If
user-defined character sets are enabled, this command will not do anything.
ESC SP n or X'1B20;n'
n The number of dot-spaces in the thermal print station or half-dot
spaces in the impact print station.
n = 03
n = 08
If you select double-width printing, the space to the right of each character
is doubled.
ESC V n or X'1B56;n'
n=00 Cancel Rotated Characters
n=01 Set Rotated Character
n=02 Code Page 863 - Canadian-French
n = 00
Rotation is 90 degrees clockwise. This command is supported only in the
thermal print station.
Appendix D. EIA-232 programming information
135