Table of Contents
Advertisement
3. Maintain ribbon tension by turning the ribbon cartridge knob as shown in
Ribbon Shield
Printhead
Figure 27. Ribbon path around the print head
4. Close the ribbon cover.
52
SureMark Printers User's Guide
Figure 26 on page 51. Lower the cartridge into position until the notches on its
sides snap into place on the printer guides. Once the cartridge is in place, turn
the knob until the ribbon slides into place between the print head and the ribbon
shield. See Figure 27 for correct ribbon positioning.
Correct
Updated April 2, 2009
Not Correct
Advertisement
Table of Contents
