Installing Suremark For Usb Communication - IBM SUREMARK TF6 User Manual

Updated April 2, 2009
11. For thermal/impact SureMark printers, locate the ribbon cartridge and install it
12. Load the paper roll into the printer. See "Paper loading" on page 53 for
13. Installation is now complete. Go to Chapter 5, "Testing and problem analysis,"

Installing SureMark for USB communication

Figure 9. USB Ports for thermal/impact SureMark printers. (View is from the bottom rear of
the printer)
in the printer. (See "Ribbon loading" on page 51.) Be sure that the ribbon is
routed through the print head correctly.
thermal/impact SureMark printers or "Paper loading" on page 71 for
single-station SureMark printers.
on page 61 for thermal/impact printers or Chapter 7, "Testing and problem
analysis (Models TF6 and TM6)," on page 75 for single-station printers and run
the offline tests.
1. Disconnect the power brick from the printer, if one is connected.
2. Locate the rear cable connectors on the printer.
Cash
Drawer
Port
Power Powered
Supply USB Port
Port
Standard
USB Port
Chapter 2. Installation instructions
21