If You Have Trouble - QMS Print System 1725E Getting Started Manual

and in the Administration/Communications/Network 2/
CrownNet/Common/HW Address menu).
If you have trouble connecting and configuring your Ethernet inter-
face, check the following:
n
Is the printer connected to the network?
n
Is the printer plugged in, turned on, and correctly configured?
n
Do the printer start-up and status pages list the interface? Is the
configuration information correct?
n
Is the interface enabled?
n
Is the appropriate protocol (or protocols) enabled?
n
Are all printer and protocol addresses configured correctly?
In addition to this chapter, the following documentation contains infor-
mation you may need when using the Ethernet interface:
n
QMS CrownNet Interface System Administrator's Guide —Pro-
vides detailed configuration and utility information.
n
QMS Crown Remote Console User's Guide —Explains how to
use Remote Console to control printing from a workstation any-
where on the network.
n
Your network documentation—Contains information on printing.