Connecting To The Network - QMS Print System 1725E Getting Started Manual

The Ethernet port, also referred to as the QMS CrownNet network
interface, is a combination of hardware and host software that allows
your QMS 1725E printer to be connected to an Ethernet network that
supports the following:
Operating System
AppleTalk
LAN Manager/LAN Server
NetWare
TCP/IP
Connecting to the Ethernet port consists of four steps:
n

Connecting to the network

n
Installing the software
n
Configuring the interface
n
Configuring the network
The rest of this chapter explains these steps in more detail.
The Ethernet port supports two types of connections:
n
Thin-wire Ethernet (10Base2, BNC connector)
n
Twisted-pair Ethernet (10BaseT, RJ45 connector)
Protocol
EtherTalk
NetBIOS/NetBEUI
IPX/SPX
TCP/IP