Lan Manager/Lan Server - QMS Print System 1725E Getting Started Manual

7 In the Queue dialog box choose OK to return to the Print
Manager window.
8 Skip to "Print Queue Sharing."
1 With OS/2 running, double-click the Templates folder.
2 Hold down the right mouse button and drag the Printer icon
out to the Workplace Shell (or into a folder).
3 Type a name in the Printer Name field.
4 Select a printer driver from the Default Printer Driver list.
IBMNULL is recommended.
5 Select a pipe name from the Output Port list.
Pipe names have the form \PIPE\QMS_ name where name is
the printer's default hardware address or the printer name
set in the "Interface Configuration" section, earlier in this
chapter.
If a QMS pipe is not available, make sure you have installed
the CrownNet Manager for OS/2.
6 Choose Create to confirm the new printer definition.
7 Continue with the following section, "Print Queue Sharing."
To access a print queue from other workstations or servers on the
network, the queue must be a shared resource. The following proce-
dure is only one of the ways a queue can be shared. For other meth-
ods, see your LAN Manager/LAN Server documentation.
1 If necessary, with OS/2 running, open an OS/2 window.