Os/2 - QMS Print System 1725E Getting Started Manual

installation software, and destination is the full pathname of
the directory in which the software will be installed (for
example, a:install a: c:\crownadm ).
3 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
4 Skip to "Configuring the Interface," later in this chapter.
1 With the Macintosh on, insert the CrownAdmin for Macin-
tosh disk in the disk drive.
2 If necessary, double-click the Utilities disk icon to open the
disk window.
3 Copy the CrownAdmin file by dragging the CrownAdmin
icon from the Utilities window to the Macintosh hard disk.
4 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
5 Skip to "Configuring the Interface," later in this chapter.
This is a two-part procedure. Some of the utilities are installed on the
print server and others on the workstation.
1 At the LAN Manager/LAN Server print server, log into the net-
work as the system administrator.
2 Insert the CrownNet Manager for OS/2 disk in the disk drive.