QMS Print System 1725E Getting Started Manual page 58

3 Open an OS/2 window, and at the C> prompt, change to the
drive in which you inserted the CrownNet Manager disk (for
example, a: ).
4 At the drive prompt type
lsminst x : y :
where x is the drive in which you inserted the CrownNet
Manager disk, and y is the drive on which CrownNet
Manager will be installed (for example, lsminst a: c: ).
lsminst x : y : /u
.
The installation program creates and installs the software in
a directory named y :\CROWN.
5 Remove the disk from the disk drive and store it in a safe
place.
6 To start the CrownNet Manager for OS/2 automatically each
time the print server is turned on, add the following com-
mands, in this order, at the end of the STARTUP.CMD file (but
before any @EXIT command):
set crownman=c:\crown
start c:\crown\crownman.exe -m
7 To start the CrownNet Manager now, open an OS/2 window
and type the following commands:
set crownman=c:\crown
start c:\crown\crownman.exe
The CrownNet Manager window appears.
8 To install specific ports, choose Install from the CrownNet
Manager window.
.
.