Thin-Wire Ethernet - QMS Print System 1725E Getting Started Manual
Print system
Hide thumbs
Also See for Print System QMS 1725E:
- Supplementary manual (8 pages) ,
- Reference (288 pages)
Table of Contents
Advertisement
Thin-wire Ethernet connections use BNC connectors.
1
Turn off the printer and unplug the power
cord.
2
Attach one section of thin-wire Ethernet
cable to one end of the BNC "T" connec-
tor.
3
Attach another section of thin-wire Ether-
net cable or a 50 ohm terminator to the
other end of the BNC "T" connector.
4
Attach the BNC "T" connector to the BNC Ethernet port.
5
Plug in the printer's power cord.
6
Turn on the printer.
Advertisement
Table of Contents
Need help?
Do you have a question about the Print System QMS 1725E and is the answer not in the manual?
Questions and answers