Testing Communication - QMS Print System 1725E Getting Started Manual
Print system
Hide thumbs
Also See for Print System QMS 1725E:
- Supplementary manual (8 pages) ,
- Reference (288 pages)
Table of Contents
Advertisement
a
Connect the 25-pin end of the cable to the PC's parallel port.
b
Tighten all screws.
c
Connect the 36-pin end of the cable to the printer's parallel
port (it's labeled "PARALLEL").
d
Close the clips.
n
Serial Cable
To Computer
a
Connect the serial cable (with the null modem adapter
attached) to the PC's 9- or 25-pin male serial port.
b
Connect the other end of the cable to the printer's serial port
(labeled "SERIAL").
c
Tighten all screws.
2
Turn on both the printer and the PC.
3
Test communication between the printer and the PC.
You can do this by printing a file from one of your applications, or
you can see the following section, "Testing Communication."
To Printer
Advertisement
Table of Contents
Need help?
Do you have a question about the Print System QMS 1725E and is the answer not in the manual?
Questions and answers