QMS Print System 1725E Getting Started Manual page 37

2 Press the front power switch located on the front, right side
of the printer.
When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 1725E Print System.
The following information prints on the start-up page:
n
Printer product name
n
Cumulative number of printed sheets
n
Amount of resident RAM (in bytes)
n
Number of PostScript typefaces in ROM
n
Default resolution
n
Software version, revision, and release numbers
n
Firmware level number
n
Address and status (on or off line) of attached hard disk(s), if any
n
Emulation and protocol information of all standard and optional
interfaces
If the start-up page prints with all the start-up page information, and
the print quality is good, you may install any optional hardware you