Table of Contents
Advertisement
Chapter 8
Formatting the Internal Hard Disk
If you experience unexplained or erratic problems with the internal
hard disk, you may want to reformat the hard disk and reload the
print system software.
NOTE: If you reformat the internal hard disk, all files on that disk
are erased, and the system software and fonts must be
reloaded.
To format the internal hard disk, follow these instructions:
1.
Turn off the printer and then on again. The following message
displays in the window:
2.
Once this message appears, you have 10 seconds to press the
Select key. When you press the Select key, the following
message appears in the message window:
NOTE: If 10 seconds passes before you press the Select key,
the IDLE message appears. You must return to step 1.
3.
Press the Next key until FORMAT DISK appears on the
second line of the message window:
4.
Press the Select key to enter the Format Disk submenu. Then
press the Next key until the following message appears in the
message window:
8 - 5 0
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
QMS SOFTLOAD x.x
READY TO BOOT
QMS SOFTLOAD x.x
BOOT SYSTEM
QMS SOFTLOAD x.x
FORMAT DISK
FORMAT DISK
DISK 6
P r i n t e r O p t i o n s
Advertisement
Table of Contents
