4.
Increase the emulation timeout (for HP PCL and HP-GL files)
or the PS wait timeout (for PostScript files).
5.
If you are using a PC, make sure that the mode statement in
your AUTOEXEC.BAT file ends in a p so that print jobs are
sent until the printer accepts them:
6.
Send an end-of-job in case a previous job lacked this
command.
T r o u b l e s h o o t i n g
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
mode lpt1:,,p
Chapter 9
9 - 2 7