QMS 19 User Manual page 352

Ibm printer user's guide
Table of Contents

Advertisement

Chapter 9
White or Light Lines
Remove each toner cartridge, shake it as you do before
installing a new cartridge to redistribute toner, and then
reinstall the cartridge.
Install a new cartridge if necessary.
Light Image (Entire Page)
Increase the print density for any color(s) used on the page
(see "Adjusting Print Density" in chapter 5 for details).
Remove each toner cartridge for a color used on that page,
and shake it as you do before installing a new cartridge.
Then, reinstall the cartridge.
Install a new toner cartridge if necessary. (See "Replacing
a Toner Cartridge" in chapter 6 for details.)
Light Image on the Left or Right Side of the Page (all colors)
Make sure the printer is level (maximum 1° slant).
Dark Image (Entire Page)
Decrease the print density for any color(s) used on the page
(see "Adjusting Print Density" in chapter 5 for details).
Install a new cartridge if necessary. (See "Replacing a
Toner Cartridge" in chapter 6, "Consumables and
Preventative Maintenance," for details.) The old cartridge
may be defective, releasing too much toner.
9 - 3 0
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
T r o u b l e s h o o t i n g

Advertisement

Table of Contents
loading

This manual is also suitable for:

Magicolor lx

Table of Contents