Engine Oil Screen Cleaning - KYMCO Yager 200i Owner's Manual

MAINTENANCE
Do not overfill the engine with oil. Overfilling the en-
gine can cause oil leaks and/or oil contamination of
the air filter element. Always make sure the oil level is
above the "L" mark but not higher than the "F" mark
on the dipstick.
8. Replace the oil filler/dipstick and tighten it securely.
9. Start the engine and let it idle for 2 - 3 minutes.
10. Stop the engine and recheck the oil level. Make sure the
oil level is at the upper mark "F" on the dip stick when
the scooter is parked upright on level ground. Make sure
there are no oil leaks and reinstall the dip stick.
Operating the scooter with a low oil level can cause low
oil pressure. Running the engine with insufficient oil
pressure can cause serious engine damage.
The engine and related components can become very hot.
Use care when inspecting the oil level so you do not burn
yourself. If needed, let the engine and exhaust system cool
before working in those areas.
46
Engine oil strainer screen cleaning
The engine oil strainer screen must be cleaned periodically
per the service maintenance schedule (see page 40).
1. Remove the oil dipstick 1 from the right crankcase cover.
2. Place a suitable container (drain pan) under the left crank-
case and remove the oil strainer screen cap 2.
1 1 1 1 1
2 2 2 2 2