Helmet Posts - KYMCO Yager 200i Owner's Manual

CONTROLS & FEATURES

Helmet posts

Your Yager 200i scooter has two helmet posts 1 so you can
secure your helmet(s) outside of the underseat storage com-
partment. To use the posts, unlock the seat (see page 22) .
1 1 1 1 1
With the seat up, put the helmet's retaining ring onto the post.
Lower and press down on the seat to lock it and secure the
helmet in place. To remove the helmet, open the seat.
Do not ride your scooter with a helmet hanging from a
helmet post. The helmet can interfere with your ability to
control your scooter, causing an accident.
Center hook
Your Yager 200i scooter has a center hook 2 to hang a shop-
ping bag, helmet or another object.
24
1. To use the hook, pull it out from the inside.
1 1 1 1 1
2. Push the lock lever 3 left to unlock the lever. You can now
hang your bag on the hook.
3. After you remove the bag from the hook, push the hook
back to its original position to avoid interference with your
clothing while riding..
2 2 2 2 2
3 3 3 3 3