Seat - KYMCO Yager 200i Owner's Manual

CONTROLS & FEATURES

Seat

To open the seat on your Yager 200i (insert the ignition switch
key to active the seat release in the ignition switch):
2 2 2 2 2
1. With the ignition switch at the "
running), push the key in and turn it counterclockwise to the
"SEAT OPEN" position.
2. With the ignition switch at the "
running), push the key in and turn it counterclockwise to the
"SEAT OPEN" position.
3. Lift up on the back of the seat to access the underseat
storage compartment.
22
1 1 1 1 1
" position (the engine is
" position (the engine not
3 3 3 3 3
To close and lock the seat on your Yager 200i:
Lower the seat and press down until it is secured by the
latch. Gently lift up on the seat to make sure it is locked
before riding.
NOTE: The "MET-IN" indicator lamp on the dash will illu-
minate if the seat is open or unlocked.