Keys; Ignition Switch - KYMCO Yager 200i Owner's Manual

CONTROLS & FEATURES

Keys

Your Yager scooter is supplied with two identical ignition switch
keys 1. The ignition key operates the ignition switch and the
steering lock, and is used to open the seat to gain access to
the underseat storage compartment.
1 1 1 1 1
Therefore, since this code is known only to you and is required
to obtain replacement keys, it is important that you record it in
the box provided on the inside, rear cover of this manual.
Ignition switch & Steering lock
Use the ignition key to operate the ignition switch, the steering
lock and open the fuel filler cap:
Position: All electrical circuits are off. The engine will not start
or run. The key can be removed from the ignition switch.
Position: The ignition circuit is "ON" and engine can now be
started. The key cannot be removed from the ignition switch in
this position.
Position: To lock the steering, turn the handlebar all the way
to the left, push in and turn the key to the "
move the key . All electrical circuits are off and the key can be
removed.
10
NOTE: The keys have a unique code
stamped on the tab supplied with
the keys. For security reasons,
this code is not stamped on the
scooter or recorded in the
vehicle's basic documentation.
" position and re-
After locking the ignition switch, turn the handlebar gen-
tly to confirm that the steering is locked.
Position: To open the fuel filler cap, turn the key to the
" " position. Before starting the engine, return the key to the
" " position.
Do not turn the ignition switch to the lock position when
riding, as this could cause the steering to lock and re-
sult in you losing control of your scooter. Do not park
your scooter in a position that will interfere with vehicle
or pedestrian traffic.