Throttle Free-Play Adjustment; Spark Plug - KYMCO Yager 200i Owner's Manual

MAINTENANCE
3 3 3 3 3
Adjusting throttle free play:
1. Slide the rubber protective sleeve 1 back to expose the
throttle cable adjuster 2.
2. Loosen the lock nut 3, then turn the adjuster to obtain
the proper free play.
Throttle free play:
3. After adjustment, tighten the lock nut and slide the pro-
tective sleeve back in place.
Engine idle speed
The engine idle speed of your Yager 200i is automatically
adjusted by the scooter's fuel injection system. If the idle
speed varies of becomes too high or too low, take your
scooter to you KYMCO dealer for service.
52
1 1 1 1 1
2 2 2 2 2
0.08 - 0.24 in (2 - 6 mm)

Spark plug

Remove the carbon deposits from the spark plug
with a small wire brush or a spark plug cleaning
machine. After cleaning (or when installing a
new spark plug) readjust the spark plug
gap to specified limit by using a spark plug
gap thickness gauge. The spark plug
should be replaced periodically. Under nor-
mal usage, a spark plug's porcelain tip should
appear light brown or tan in color. If the spark plug
porcelain tip is very white or glazed appearing, then the spark
plug has been operating too hot. In such a situation,
you should replace the standard spark plug with a
spark plug that has a colder heat range (usually a
higher number; consult with your KYMCO dealer
when selecting an alternate spark plug).
Recommended spark plug
Spark plug type: DPR6EA-9
Spark plug gap: 0.024 - 0.028 in
(0.6 - 0.7 mm)
An improper spark plug may have an incorrect fit or heat
range for your scooter's engine. This may cause severe
engine damage which will not be covered under warranty.
Never use a spark plug with an improper heat range, as
severe engine damage may result.