Battery - KYMCO Yager 200i Owner's Manual

Table of Contents

Advertisement

MAINTENANCE
Rear brake pads
Check the cutout in each brake pad. The cutout should be
visible indicating that brake pad is not worn down to the brake
rotor. If either pad is worn to the cutout, replace both pads as a
set.
NOTE: See your KYMCO dealer for brake pad service.
Worn brake pads should be replaced immediately. If the
pads are not worn, have your brake system inspected
for leaks. Do not ride your scooter unless the brakes
are in perfect working order.

Battery

Your KYMCO scooter is equipped with a maintenance-free
(sealed) battery, so it is not necessary to check the battery's
electrolyte level or add distilled water.
NOTE: If your battery seems weak and/or is leaking elec-
trolyte (causing hard starting or other electrical troubles),
contact your KYMCO dealer immediately .
Your battery is a maintenance-free type and can be per-
manently damaged if the cap strip is removed.
Charge the battery with a charger specifically designed
for use with a maintenance-free type battery. Using an-
other type of charger can damage the battery.
Your scooter's battery gives off explosive hydrogen gas
during normal operation. A spark or flame can cause
the battery to explode with enough force to kill or seri-
ously injure you. Wear protective clothing and a face
shield, or have a qualified technician perform the bat-
tery maintenance.
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents