Setting The Video Type For A Video Input; Changing The Video Output Resolution; Changing The Output Aspect Ratio; Selecting A Video Test Pattern - AMX Enova DVX-3150HD Operation/Reference Manual

Audio/Video Configuration
Video Input Menu Options (Cont.)
Saturation
Hue
Phase
H Shift
V Shift
Revert to Default

Setting the Video Type for a Video Input

Each video input type must be set manually. Perform these steps to set the video type for a video input:
1.
Press the VIDEO MENU button on the front panel of the DVX two times to open the Video Input menu.
2.
Press the left and right navigation buttons to select the input to change. You can select any input from
1-10.
3.
Press the down navigational button until the Type option appears.
4.
Use the left and right navigational buttons to select the video format for the selected input.

Changing the Video Output Resolution

Perform these steps to change the video output resolution:
1.
Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2.
Press the left and right navigation buttons to select the output to change (ALL, 1, 2, 3, or 4).
3.
Press the down navigational button until the Resolution option appears.
4.
Use the left and right navigational buttons to locate the appropriate output resolution and refresh rate. You
can also choose Auto to automatically detect the resolution and refresh rate.

Changing the Output Aspect Ratio

Perform these steps to change the output aspect ratio:
1.
Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2.
Press the left and right navigation buttons to select the output to change (ALL, 1, 2, 3, or 4).
3.
Press the down navigational button until the Aspect Ratio option appears.
4.
Use the left and right navigational buttons to locate the appropriate aspect ratio.

Selecting a Video Test Pattern

Selecting a test pattern for your input source can help determine if the displays are connected correctly.
Perform these steps the select a test pattern:
1.
Press the VIDEO MENU button on the front panel of the DVX to open the Video Output menu.
2.
Press the left and right navigation buttons to select the output on which to display the test pattern (ALL, 1,
2, 3, or 4).
3.
Press the down navigational button until the Logo/Test option appears.
4.
Use the left and right navigational buttons to select the appropriate output test pattern.
48
Use the left and right navigational buttons to alter the saturation level adjustment applied
to the selected input. You can set the saturation level from 0-100. The default setting is
50.
Use the left and right navigational buttons to alter the hue adjustment applied to the
selected input. You can set the hue level from 0-100. The default setting is 50.
Use the left and right navigational buttons to alter the phase adjustment for the selected
input. This option is only available for RGB inputs. You can set the phase adjustment
from 0-31. The default setting is 0.
Use the left and right navigational buttons to shift the location of the video input from left
to right. This option is only available for RGB inputs. You can set the shift from -50 to 50.
The default setting is 0.
Use the left and right navigational buttons to shift the location of the video input up and
down. This option is only available for RGB inputs. You can set the shift from -10 to 10.
The default setting is 0.
Use the left and right navigational buttons to indicate that you want to return all video
options to their default settings.
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide