Mmio Register Write/Read Test Failure; Boot Prom Test Failure; Aip Checksum Test Failure; Shared Ram Boundary/Domain Test Failure - 3Com 09-0572-000 User Manual

The following information is displayed on the screen,
indicating what to do when the specific test fails.

MMIO Register Write/Read Test Failure

Check the ROM base address setting on the adapter and
make sure that it is not being used by another device.
Run the test three times with a delay of at least 30 seconds
between each test. If the error persists, power down the PC
and try once more.

Boot PROM Test Failure

Check the ROM base address setting on the adapter and
make sure that it is not being used by another device.
Refer to the "Configuration Options" section in Appendix B
for more information.

AIP Checksum Test Failure

Check the ROM base address setting on the adapter and
make sure that it is not being used by another device.
Run the test three times with a delay of at least 30 seconds
between each test. If the error persists, power down the PC
and try once more.

Shared RAM Boundary/Domain Test Failure

Make sure the RAM base address is aligned according to the
selected shared RAM size.
Make sure the shared RAM address does not conflict with the
adapter ROM or another device.
When Tests Fail
7-11