3
The AutoLink auto installation feature for NetWare configures
the adapter as a NetWare DOS ODI client. The AutoLink
installation steps are depicted in Figure 3-1.
If memory manager is installed,
exclude memory range
Insert TokenDisk diskette.
Make diskette drive active.
Select ring speed and
and reboot computer
Figure 3-1 AutoLink Installation Process
This chapter describes the AutoLink program requirements,
ways to avoid memory conflicts, and installation steps. See
Chapter 5 for other NetWare and NDIS operating system
information and see Chapter 6 for information about installing
the network driver for Windows NT and Windows 95.
The AutoLink program performs the following functions:
Configures the 3C619C adapter.
Tests the adapter.
Installs the DOS ODI client driver.
U
SING THE
F
EATURE FOR
D8000 – DBFFF
Type: AUTOLINK
configuration mode
Remove diskette
A
L
UTO
INK
N
W
ET
ARE