When Tests Fail; Adapter Statistics And Information; Adapter Statistics - 3Com 09-0572-000 User Manual

When Tests Fail

If any test fails, you can get additional information by
highlighting the test that failed in the Run Tests dialog box
shown in Figure 7-4, and pressing [Enter]. You can also
highlight the <Zoom> command button and press [Enter].
The program notifies you of the error and suggests actions
you can take to solve the problem.

Adapter Statistics and Information

Use the adapter statistics and information feature to view
statistics of adapter operation and current adapter
configuration.

Adapter Statistics

Use the View pull-down menu and select Adapter Statistics,
or press [F9] from the main screen. An example of the
Adapter Statistics screen is shown in Figure 7-6. Press [F1] on
this screen for a short explanation of the highlighted
statistics. Use the scroll bar to display the full list of statistics
on this screen.
Quit Install
Total frames transmitted:
Total frames received:
Receive with no buffer:
Transmit errors:
Adapter check errors:
Line errors:
Internal errors:
Burst errors:
A/C errors:
Abort delimiters:
Invalid ARB commands:
Lost frame errors:
[ENTER]=<Cancel>
[Alt]+<Highlighted Key>=Execute Function [PgDn]=Page Down [PgUp]=Page Up
Figure 7-6 Adapter Statistics
Diagnostic and Manual Configuration Program
Test View Select
3Com 3C619C Token Ring Address = 00608C112233

Adapter Statistics

[ ]=Scroll
Adapter Statistics and Information
7-9
F1=Help
0
0
0
0
0
0
0
0
0
0
0
0
Cancel