Adjusting The Front Wheel Static Balance - Yamaha YP400T, YP400V, YP400W Service Manual

FRONT WHEEL AND BRAKE DISC
a
b
2. Install:
• spacer
• speed sensor
• front wheel
NOTE:
_
• Make sure that the projections on the speed
sensor are installed in the slots on the wheel
hub.
• Make sure that the slot a in the speed sen-
sor fits over the stopper b on the outer tube.
3. Tighten:
• front wheel axle
• front wheel axle pinch bolt
WARNING
_
Make sure the brake hose is routed prop-
erly.
CAUTION:
_
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds
smoothly.
EAS00548
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
_
• After replacing the tire, wheel or both, the
front wheel
adjusted.
• Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
• balancing weight(s)
4 - 7
CHAS
55 Nm (5.5 m · kg, 40 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
static balance should be