Yamaha YP400T, YP400V, YP400W Service Manual page 259

STARTER CLUTCH AND GENERATOR
b
a
3. Apply:
• sealant
(onto the crankshaft position sensor/stator
assembly lead grommet)
Yamaha bond No. 1215
90890-85505
Sealant (Quick Gasket
ACC-11001-05-01
4. Install:
• generator rotor cover
• generator rotor cover bolts
NOTE:
• Align the projection a on the impeller shaft
with the slit b on the balancer shaft.
• Tighten the generator rotor cover bolts in
stages and in a crisscross pattern.
5 - 55
ENG
®
)
10 Nm (1.0 m · kg, 7.2 ft · lb)