Yamaha YP400T, YP400V, YP400W Service Manual page 11

GEN
FEATURES
INFO
Odometer and tripmeter modes
Pushing the "SELECT" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "TRIP" in the follow-
ing order:
ODO → TRIP (top) → TRIP (bottom) → ODO
When approximately 2.8 L (0.62 Imp gal,
0.74 US gal) of fuel remains in the fuel tank, the
bottom segment of the fuel meter and fuel level
warning symbol will start flashing, and the dis-
play will automatically change to the fuel reserve
tripmeter mode "TRIP F" and start counting the
distance traveled from that point. In that case,
pushing the "SELECT" button switches the dis-
play between the various tripmeter and odome-
ter modes in the following order:
TRIP F → TRIP (top) → TRIP (bottom) →
ODO → TRIP F
1 Fuel reserve tripmeter
To reset a tripmeter, select it by pushing the
"SELECT" button, until "TRIP" or "TRIP F"
begins flashing ("TRIP" or "TRIP F" will only
flash for five seconds). While "TRIP" or "TRIP F"
is flashing, push the "RESET" button for at least
one second. If you do not reset the fuel reserve
tripmeter manually, it will reset itself automati-
cally and the display will return to the prior
mode after refueling and traveling 5 km (3 mi).
1
NOTE:
The display cannot be changed back to "TRIP
F" after pushing the "RESET" button.
Fuel meter
With the key in the "ON" position, the fuel
meter indicates the amount of fuel in the fuel
tank. The display segments of the fuel meter
disappear towards "E" (Empty) as the fuel level
decreases. When the fuel level reaches the
bottom segment near "E", the fuel level warn-
ing symbol and the bottom segment will flash.
Refuel as soon as possible.
CAUTION:
If the fuel level is not displayed and the fuel
level warning symbol, triangular mark, "E"
line, and "F" line flash in the fuel meter, the
fuel level monitoring system is malfunc-
tioning. Check the fuel sender and the elec-
trical circuit.
1 - 5