Cleaning The V-Belt Case Air Filter Element - Yamaha YP400T, YP400V, YP400W Service Manual

REPLACING THE AIR FILTER ELEMENTS/

CLEANING THE V-BELT CASE AIR FILTER ELEMENT

1
1
3. Install:
• air filter element
• air filter case cover
(along with the gasket)
CAUTION:
_
Never operate the engine without the air fil-
ter element installed. Unfiltered air will
cause rapid wear of engine parts and may
damage the engine. Operating the engine
without the air filter element will also affect
the carburetor tuning, leading to poor
engine performance and possible overheat-
ing.
NOTE:
_
When installing the air filter element into the air
filter case cover, be sure their sealing surfaces
are aligned to prevent any air leaks.
EAS00091
CLEANING THE V-BELT CASE AIR FILTER
ELEMENT
1. Remove:
• footrest board (left)
Refer to "RIDER SEAT AND STORAGE
BOX".
2. Remove:
• V-belt case air filter cover 1
• V-belt case air filter cover seal
• V-belt case air filter element
3. Clean:
• V-belt case air filter element 1
Blow the compressed air to the outer sur-
face of the V-belt case air filter element.
4. Check:
• V-belt case air filter element
Damage → Replace.
CAUTION:
_
Since the V-belt case air filter element is a
dry type, do not let grease or water contact
it.
5. Install:
• V-belt case air filter element
• V-belt case air filter cover seal
• V-belt case air filter cover
• V-belt case air filter cover screw
3 - 29
CHK
ADJ