Assembling And Installing The Rear Brake Caliper - Yamaha YP400T, YP400V, YP400W Service Manual

FRONT AND REAR BRAKES
a
2
New
1
New
4 - 41
8. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
9. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
ASSEMBLING AND INSTALLING THE
REAR BRAKE CALIPER
WARNING
_
• Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
• Never use solvents on internal brake
components as they will cause the piston
seals to swell and distort.
• Whenever a brake caliper is disassem-
bled, replace the brake caliper piston
seals.
Recommended brake fluid
DOT 4
1. Install:
• brake caliper piston seal 1
• dust seal 2
New
CHAS
New