Cisco 7961 Quick Start Manual page 6

Cisco 7961 & 7941 IP Phone Quick Start Guide
Feature
To Call Forward to
Voicemail
(if your system has the
voicemail module installed)
Adjusting Phone Settings
Feature
Adjusting the Phone
Volume
The volume of the handset,
headset or speakerphone can
be adjusted as follows
Adjusting the Ringer
Volume
To change the volume of the
phone ringer
Changing the Ringer
Sound
To change the ring type used
by the phone
Changing the Display
Contrast
To change the contrast
setting of the phone LCD
display
Cisco IP 7961 & 7941 User Guide
Function
Press the more soft button
Press CFwdALL soft button
Press messages button
Press the # button or EndCall soft button
Note: If the handset has multiple incoming line buttons programmed
on it, and you need Call Forwarding for each line, you must select
the line first by pressing the associated line button then follow the
above instructions.
Function
With the phone off hook (using either handset or speakerphone):
Press the up or down volume button.
desired volume for your handset, headset, or speakerphone
Unless the setting is saved the volume adjustment is applicable
only for the current call
To save the volume setting for future calls, press the Save soft
button
Press the volume
While the ring plays, press the up or down volume button to
adjust the volume to the desired level
To save the ring volume setting, press the Save soft button
Press the Settings
Select Ring Type from the Settings menu
Press the Select soft button to select 'Default Ring'
To scroll through the list of ring types, press the Navigation
button
Press the Play soft button to hear the selected ring type
When you find the ring you want, press Select then press the
OK
Press Exit soft button twice
Press the Settings
Select the Contrast option on the Settings menu
Press the Up or Down soft button to set the desired intensity
Press the OK soft button to accept your changes
To save and exit this Contrast setting, press the Save soft
button. Otherwise, press the Exit soft button to exit the Settings
menu
Version 2.0
button to hear a sample ring
button
button
Page 6
to select the