Cisco 7962G Administration Manual page 74

Network Configuration Menu
For information about the keys you can use to edit options, see the
Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP) server
from which the phone obtains its IP
address.
BOOTP Server Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server instead of from a DHCP
server.
MAC Address Unique Media Access Control (MAC)
address of the phone.
Host Name Unique host name that the DHCP server
assigned to the phone.
Domain Name Name of the Domain Name System (DNS)
domain in which the phone resides.
IP Address Internet Protocol (IP) address of the phone.
If you assign an IP address with this option,
you must also assign a subnet mask and
default router. See the Subnet Mask and
Default Router options in this table.
Subnet Mask Subnet mask used by the phone.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
4-6
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
"Editing Values" section on page
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Unlock network configuration
1.
options.
Set the DHCP Enabled option to
2.
No.
Scroll to the Domain Name
3.
option, press the Edit softkey,
and then enter a new domain
name.
Press the Validate softkey and
4.
then press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP Enabled option to
2.
No.
Scroll to the IP Address option,
3.
press the Edit softkey, and then
enter a new IP Address.
Press the Validate softkey and
4.
then press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP Enabled option to
2.
No.
Scroll to the Subnet Mask option,
3.
press the Edit softkey, and then
enter a new subnet mask.
4. Press the Validate softkey and
then press the Save softkey.
4-3.
OL-12641-01