I Com Port Confirmation; Driver Installation - Icom ID-RP1 Instruction Manual

3

DRIVER INSTALLATION

I COM port confirmation
After the driver installation, confirm the driver availabil-
ity and the port number are recommended.
In this section, screen shots of Windows XP are used
for instruction example. However, the instructions are
similar to another operating systems, Windows 98, Me
and 2000.
q Boot up the Windows.
w Select the "Control Panel" in the Start menu.
• Control panel appears as shown in the next step below.
e Double click the "Performance and Maintenance."
• Performance and Maintenance menu appears.
r Double click the "System," then click the "Hardware"
tub in the displayed System Propaties screen.
t Click the "Device Manager."
• Device Manager screen appears as below.
14
y Click " " of the "Ports (COM & LPT)" to display the
u Confirm the USB serial port availability and the
Double click
i Close the Device Manager, System Propaties
Click
usable COM port and the port number.
Click
COM port number.
• The COM port number is used for the COM port setup.
(p. 17)
Confirm the USB serial port availability and the COM port
number.
(In this example, the USB serial port number is "3.")
screen and then Control panel.