Setting The Repeater - Icom ID-RP1 Instruction Manual

!0 Click [EDIT].
Click
• The PC start to read ID-RP1D current settings.
• After read the all settings, Edit Parameters screen ap-
pears.
!1 Type the specified call sign for the connected ID-
RP1D into the Repeater 1's cell.
Type the specified call sign of the connected
ID-RP1D.
Click to display "✔" mark.
!2 Click " " button in the "This Repeater" then select
"Repeater 1" to
Click then select "Repeater 1."

SETTING THE REPEATER

!3 Click the "Repeater 2" check box to displays "✔"
mark, when setting a nearby repeater for repeater
link operation.
Type the specified call sign of a nearby
ID-RP1D to be linked.
Click to display "✔" mark.
!4 Click Data A " " button in the "Adjacent Repeaters"
then select "Repeater 2" to
!5 Repeat the steps !3 when setting another nearby
repeaters call signs, and repeat the steps !4 when
linking another repeater.
!6 Click [OK] to program the setting into the ID-RP1D
and close the screen.
Click then select "Repeater 1."
Click
5
19