Oce TDS800 User Manual page 91

Enter your user name 'anonymous', and enter as your password also
4
'anonymous'.
A connection is now set up for the default user 'anonymous'.
As there is no registered user, you can simply press Enter to initiate
Note:
the connection.
Set the transmission mode to binary by entering 'binary'.
5
Go to the 'tempstore' directory using the following command: 'cd tempstore\'.
6
Go to the 'scan' directory if you want to retrieve a file from a destination on
7
the local host,
or
go to the 'unsent' directory if you want to retrieve a file from 'unsent' folder
on the local host.
Get the data file (for example: bugatti.tif) via the 'get' command:
8
'get bugatti.tif'.
Quit FTP by entering the 'bye' command.
[41] The ftp directories on the Océ TDS800
Using the Océ TDS800 to scan-to-file 91