Copying with removed filing strip along the right hand side
Select one of the roll selection keys on the operator panel.
1
Select the 100% key.
2
Make sure the 'auto zoom', 'auto roll', and 'Scan width' are not selected.
3
Make other settings as required.
4
Feed the original.
Leading and trailing strip
and trailing strip to eliminate or add a filing strip. Leading and trailing strips
can be extended up to 400 mm or shortened up to 400 mm (see Figure 49).
[49] Example of adjusting the leading and trailing strip of an original
Special copy and scan jobs
It is possible to adjust the length of both the leading
Leading strip
-400 mm
Trailing strip
-400 mm
Leading strip
+400 mm
Trailing strip
+400 mm
101