Oce TDS800 User Manual page 198

Remove the trailing strip of the old tape (see Figure 105).
3
[105] Remove the trailing strip of the old tape.
Remove the screw of the front side plate of the roll holder with the green nut
4
and remove the old kernel.
Clean the reinforcement knives before you put in a new roll
Note:
How to insert a new tape roll
Put the new roll and close the side plate. Put the roll with the holes to the back
1
and the protection sheet to the front (see Figure 106).
[106] Put the new roll
198 Océ TDS800 User Manual