from the local controller via File Transfer Protocol (FTP) (see Figure 40). Also
if during scanning to a remote destination, something goes wrong, you can
retrieve your files from the local controller.
Files scanned to a local destination are stored in the directory of the controller.
You can retrieve your files from the local host via File Transfer Protocol (FTP).
FTP can be done:
via an internet browser
1
an FTP application, or
2
via a command line prompt.
3
[40] How to retrieve scan files
Retrieve files via an FTP command line promp
Launch an FTP client.
1
Enter the 'ftp' command.
2
A DOS box now appears with the FTP prompt.
Enter the 'Open' command followed by either the registered name of the Océ
3
Power Logic® Controller or the IP address (for example: 194.2.66.146) to
connect to the Controller and press Enter: 'open 194.2.66.146'.
Instead of performing steps 2 and 3 you could also enter "ftp
Note:
host_name" in the FTP client.
The connection with the Controller is now established and a window appears
asking you for a user name.
90
Océ TDS800 User Manual
t