Oce TDS800 User Manual page 192

Define the media type
Press the 'On-line' key on the printer operator panel to put the printer Off-line.
1
The message 'Off-line' is displayed in the status window.
Press the left selection key to shift the focus to the media selection.
2
Use the arrow keys to select roll 1, to 6 (see Figure 97).
3
Press the right selection key to select the setting you want to define.
4
Use the arrow keys to define the settings.
5
The system detects the media size. Media sizes of both the DIN and
Note:
ANSI paper series are available. Use the Arrow buttons to select either a
DIN or ANSI format.
Put the printer On-line again by pressing the 'On-line' key.
6
Selection keys
[97] To set the correct media
When you are ready, you can continue your job.
7
192 Océ TDS800 User Manual
Ready to print