Oce TDS800 User Manual page 85

Click Ok to accept the destination settings.
4
The destination properties are now locked.
This option is only available if you are logged on as a Key operator (see
Note:
'User modes' on page 163).
Unlock a destination
Select a destination.
1
Open the 'File' menu and select 'Properties'.
2
Uncheck the 'Locked' check box.
3
Click OK to accept the destination settings.
4
The destination properties are now unlocked.
This option is only available if you are logged on as a Key operator
Note:
(see 'User modes' on page 163).
Delete a destination
Select a destination.
1
Open the 'File' menu and select 'Delete' or click the 'Delete' button on the
2
toolbar (see Figure 33).
[33] 'Delete' button on the toolbar
The selected destination is deleted.
This option is only available if you are logged on as a Key operator or
Note:
as a Repro operator.
You are not able to delete the last destination.
Note:
Set / Change destination properties
Select a destination.
1
Open the 'File' menu and select 'Properties' or click the 'Properties' button on
2
the toolbar (see Figure 34).
[34] 'Properties' button on the toolbar
The 'Destination properties' screen appears as in figure 32 on page 83.
Change the destination properties as described in 'Create a local destination'
3
on page 82.
Using the Océ TDS800 to scan-to-file 85